Opties        
  IR35 -100/600 230V PID inbouw 96x96  
     
   
     
 
r Digitale thermostaat.
r PT100 koppels
r Hoge nauwkeurigheid
   
     
     
     
     
   
  This type of control works on the outputs depending on the Set Point, on the functioning mode and on the differentials programmed. The functioning is correct when it’s programmed a negative differential in case of heating control and a positive differential in case of refrigeration control. It’s possible to program two Set Point as dependent or independent one from the other and furthermore to program the band alarm function. The output OUT2 can be used as high or low, deviation and absolute alarm. The functioning of the regulator can be modified through the parameter of outputs delay and through the Dynamic Set Point function.
 
     
  Specificaties  
     
 

According to the used probe and to the measurement unit.

 
 

Self-extinguishing plastic, UL 94 V0

 
 

96x96 mm (1/4 DIN) – depth 73 mm

 
 

330 g approx.

 
 

Extractable 2,5 mm2 screw terminal block

 
 

Flush in panel in 90x90 mm hole

 
 

IP 54 mounted in panel with gasket

 
 

24 VAC/VDC, 100-240 VAC +/-10%

 
 

50 / 60 Hz

 
 

5 VA approx.

 
 

Pt 100 IEC, According to IEC 751 accuracy class A or B

 
 

2 free voltage contacts

 
 

2 outputs SPDT 8A

 
 

Up to 2 outputs : 8 mA / 8 VDC

 
 

12 VDC / 20 mA max

 
 

Temperature , Relative Humidity, Pressure control

 
 

ON/OFF, PID , NEUTRAL ZONE programmable

 
 

+/-0.5% full scale

 
 

130 msec.

 
 

According to the used probe 1/0,1/0,01/0,001

 
 

According to the used probe and to the measurement unit

 
 

4 red digit h=12 mm

 
 

0…50°C

 
 

0…55°

 
 

30…95 RH% without condensation

 
  CE, RoHS en WEEE  
 
  Leveringsomvang:    
 
l
l
   
   
 
     
  Opties