| |
|
|
|
|
AAN6 IP simulator 1 link 250k pakketten p.s. 100Mbps |
| |
|
|
|
 |
| |
|
|
|
|
r |
Easy to Use –
no software, plug and play. |
|
r |
Bandwidths up
to 100 Mbps. |
|
r |
Delay from 1
ms to 10 seconds – perfect for satellite delay
modeling. |
|
r |
Precise Error
Insertion. |
|
r |
Congestion
Emulation. |
|
r |
Unique
Scheduler for modeling different error scenarios. |
|
r |
Traffic
Monitor for visibility into traffic flow through
the box. |
|
r |
Bridge or
Router Modes. |
|
r |
Command Line
Interface. |
|
r |
Remote access
via Ethernet management port. |
|
r |
Applications: |
|
- |
Network Validations.
|
|
- |
Equipment Testing.
|
|
- |
Troubleshooting.
|
|
- |
Application Testing/ QA Testing.
|
|
- |
Website Performance.
|
|
- |
VoIP.
|
|
- |
Video and IPTV.
|
|
- |
Product Demonstrations.
|
|
- |
Product Benchmarking.
|
|
|
| |
|
The AAN6 simulates IP networks with varying
capacities from 100 Mbps copper to 1 link
interfaces. It can simulate all
the conditions encountered in a real-time such
as network latency, network delay variation
(jitter), bandwidth, congestion, packet errors,
bit errors and other link impairments
independently in both directions at speeds of up
to 100 Mbps per link. The AAN6 emulates a WAN
(wide area network) link between two local
networks. It can be used to test IP end point
devices such as Gateways, IADs, IP phones, Soft
phones, and so on for voice, fax, data, or
multimedia transmission over IP. The AAN6 offers an
efficient and economical way to emulate
terrestrial, wireless, internet, satellite, or
private network links to validate and
troubleshoot networks and applications under a
spectrum of real-world conditions. Through an
intuitive, browser-based graphical interface,
you can install the AAN6 and begin testing
within minutes. |
|
| |
|
|
|
|
Specificaties |
|
|
|
|
| |
|
|
|
|
Capacity: |
|
| Max.
Emulation Rate: |
up to 100
Mbps full duplex |
| Max. Packet
Rate: |
From
250,000 packets per second |
| Emulated
Links: |
1 link |
| |
|
|
Primary Emulation Settings |
|
| Bandwidth: |
300 bps -
Max. rate in 1 bps increments |
| Delay: |
0 ms – 10
sec. in 0.1 ms increments; constant, uniform, normal
distributions |
| Packet Loss
Rate: |
0 – 100%
in increments of 0.0001% |
| Background
Traffic: |
0-100% in
increments of 0.1% |
| Bit Error
Rate: |
Rates to
1x10-14 |
| Additional
Emulation Parameters: |
Bit error
rate, packet reordering, packet duplication, queue
depth, framing overhead. The AAN6 scheduler for
emulation of dynamic WAN conditions |
| |
|
|
Interfaces |
|
| Emulation: |
2 x 10/100/1000baseT Copper Gigabit Ethernet |
| Management: |
1 x
10/100/1000baseT Copper Gigabit Ethernet |
| |
1x RS-232c
serial console |
| |
|
|
Environmental and Physical Specifications |
|
| AC Input
Voltage: |
Auto
ranging 90 VAC to 264 VAC |
| AC Input
Frequency: |
47 to 63
Hz |
| AC Input
Current (Max): |
4.0 A |
| Maximum
Power Draw: |
200W |
| Dimensions: |
42.5 cm W x 36.5 cm D x 4.35 cm H (1 RU) |
| Weight: |
5 kg. |
| Operating
temperature: |
0° to 40°C |
| Storage
temperature: |
-20° to
80°C |
| Operating
humidity: |
10% to 90%
(non-condensing) |
| Storage
humidity: |
10% to 90%
(non-condensing) |
| Goedkeuring: |
FCC, CE, RoHS en WEEE |
| |
|
|
|
|
Leveringsomvang |
| |
|
|
|
| l |
AAN6 IP simulator 1 link 250k pakketten p.s. 100Mbps |
| l |
Gebruiksaanwijzing |
|
|
| |
|
|
|
 |
| |
|
|
|