AAR4 Netwerktester en monitor

r	Low cost hand-held LAN Cable Tester.
r	High resolution and high accuracy.
	-
	Resolution : 5cm
-
Accuracy : +/-1% of reading +/-10cm
r	TCP/IP protocol analysis.
	-
	Service of the environment of static IP address or DHCP(Dynamic Host Configuration Protocol),
-
Service of assigning MAC address by itself
r	LAN cable fault detection for open, shorted, crossed, split and reversed pair.
r	Built-in tone generator included a free inductive probe allows you to verify cable's continuity and trace the cable in walls, floors and ceilings.
r	Auto fitting function for the various cable measurement.
r	Extra-large backlit (icon type 7 segment) LCD.
r	Easy-to-use test modules.
r	20 additional library memory spaces for new VOP settings.
r	Overload voltage protection : Displays "OUCH" alert message with sound when line voltage exceeds 6.5V.
r	Low power consumption with long battery life : 5,000 tests.
r	Applications:
	-
	UTP cable (CAT 3/4/5/5e/6).
	-
Telephone line and coaxial cable
-
.Any paired (shielded or twisted) metallic telecom cable AAR4 is primarily designed for LAN installer, cable wholesalers, retailers, contractors, electricians, cable installers and alarm installers needing to troubleshoot and measure individual line faults (open and short), pairings, and their distances.

The AAR4 is a combination unit that utilizes MTDR (Metallic Time-Domain Reflectometry) technology used in measuring cable distance and TCP/IP protocol analyzer for examining internal conditions of LAN communication lines. To improve the efficiency on LAN cable management, the AAR4 also has a pairing check function used for pinpointing the ill connection of LAN connectors (open, short, reversed, crossed and splitted) and a tone probing function used for tracing cable in the walls, floors and ceilings. The AAR4 is ideally suited for work on installation of networks and for ongoing maintenance and service to any type of paired (shielded or twisted) metallic cables such as category 5/6 UTP cables, Telephone lines, Coaxial cables and LAN systems. Its' all-inone testing capabilities meets the needs of every cable contractors, installers and technicians at lowest cost. The AAR4 is housed in a rugged ABS enclosure designed to deliver water-resistant performance and provides technicians with the added convenience of being hand-held. It is powered by four AA(NEDA 15A or LR6) batteries, which are stored in a compartment on its back.

Specificaties

Performance

Measurable cable:

UTP Cable ( CAT 3, 4, 5, 5e & CAT 6 ), Coaxial and Telephone cable

Minimum display resolution:

5 cm.

Accuracy:

+/-1% of reading +/-10cm

Measurement range:

300m

TCP/IP protocol analysis:

Service of the environment of static IP address or DHCP(Dynamic Host Configuration Protocol) Service of assigning MAC address by itself.

LAN pair check:

Open, Short, Crossed, Split, Reversed pair

Additional library:

20 additional library memory spaces for new VOP settings

VOP:

Adjustable from 0.1% to 99.9% ( in 0.1% step)

Tone Generation:

1kHz, 5V pulse

Free inductive probe allows you to verify cable's continuity and trace the cable in walls, floors and ceilings

Automatic power off:

Upon 10 minutes of inactivity

Interface

Connector type:

RJ45 & BNC

LCD display:

Extra-large backlit(ICON type 7 segment) LCD

Operating temperature:

-18°C ~ +60°C

Storage temperature:

-20°C ~ +70°C

Humidity:

85% at 35°C

Dimensions:

235mm(H) x 44mm(D) x 100mm (W)

Battery:

4LR6(AA)

Battery life:

Approx. 5,000 tests

Weight

450g

EMC

BS/EN 61326-1

Safety:

Complies with IEC 61010-1

Goedkeuring:

CE, RoHS en WEEE

Leveringsomvang

l	AAR4 Netwerktester en monitor
l	Soft carrying case
l	RJ45 to RJ45 female coupler
l	RJ45 to RJ45 patch cable

l	Female RJ45 to female BNC (Remote identifier #1 only)
l	Male BNC to female RJ45 adaptor
l	Gebruiksaanwijzing

Opties