| |
|
|
|
|
AAN5 Netwerktester en Monitor |
| |
|
|
|
 |
| |
|
|
|
|
|
|
The AAN5
is the all-in-one and easy-to-use network qualification unit
measuring logical network performance and physical condition of
network cables. It allows network engineers to install and
maintain efficiently Local Area Networks (LAN) with 10BASE-T and
100BASE-TX based on the Ethernet protocol. For measuring logical
network performance, it provides the round-trip time (RTT) testing to measure network speed under dynamic and static
configuration protocol and the IP scanning to show the
information on all the terminals connected to a local network.
It can also evaluate the capability of link partners such as
supported network speed (10BASE-T or 100BASE-TX) and duplexity
(half- or full-duplex). The device provides the physical
information of the LAN cable under test such as cable length,
faulty positions (open or short) and wire map (open, short,
split, crossed and reversed). In particular, with the novel
high-resolution graphic TDR (Time-Domain Reflectometer) and TDX
(Time-Domain Crosstalk), it is possible for users to locate
faulty positions along the cable up to 1km. These TDR and TDX
can also be utilized to any type of cables such as Coaxial
cables for cable TV and HFC networks and Telephony cables. The tone generating function
is used
to identify cable connection and to trace cable in the walls,
floors and ceilings, and continuity testing function to check
out continuity of cable. With the graphic user interface
supplied by 128x64 LCD and serial communication port, field
engineers can easily apply the device to network testing,
transfer the stored data to their PCs and print reports with
optional thermal printers.
The AAN5 has a
rugged
ABS enclosure and is powered by Li-polymer
chargeable battery with 6-hour battery life. |
|
| |
|
|
|
|
Specificaties |
|
|
|
|
| |
|
|
|
|
LAN Measurement |
|
|
LAN Distance
measurement: |
Graphic, Numeric
TDR / Graphic TDX |
| |
Minimum display
resolution : 10cm @ VOP 66.7% |
| |
Measurement
range : up to 300m (graphic), 5m to 300m (numeric) |
| |
Distance
accuracy : ±4% of reading or 0.5m |
|
Wiremap: |
Open, short,
reverse, cross, split fault test |
|
Crosstalk
characteristic: |
Crosstalk test for 10
base-T, 100 base-TX and 1000 base-T |
|
Impedance: |
Graphic display
of an approximate impedance |
|
Continuity: |
Measurement of
continuity lines |
|
COAX Measurement |
|
|
Coax
Distance measurement: |
Graphic TDR /
Numeric TDR (optional) |
| |
Minimum display
resolution : 10cm @ VOP 66.7% |
| |
Measurement
range : up to 1km (Graphic), 5m to 500m (numeric) |
| |
Distance
accuracy : ±4% of reading or 0.5m |
| |
|
|
Automatic
Measurement: |
Carrying out
sequentially the following tests to collect network’s physical
information:
- 10 base-T, 100 base-TX,1000 base-T
- Signal performance (crosstalk), continuity |
|
Network
Analysis: |
Measuring
round-trip time |
| |
Link partner
ability test (10M half, 10M full, 100M half, 100 full) |
| |
Support 10M
half, 10M full, 100M half, 100 full duplex |
| |
IP scan (IP/MAC
address/netbios name) |
| |
Link Blink |
|
Storage: |
100ea (automatic
test output), 20ea (TDR waveform), IPScan 50, DHCP 100, Fixed IP 100 |
|
Tone Generation: |
1kHz analog tone
signal output |
|
Display: |
2.5" (128 x 64)
mono graphic LCD |
|
Power: |
11.1V
(Li-polymer, 1800mAh) |
| |
15V / 1A AC-DC
adapter |
| |
Operating time:
6hours / Recharge time: 4hours |
|
External
Interface: |
USB, RS-232C,
Printer |
|
Operating
temperature: |
-15°C ~ 55°C |
|
Storage
temperature: |
-20°C ~ 70°C |
|
Humidity: |
95% |
|
Safety: |
EM61010-1
overvoltage CATII, CATIII |
| Goedkeuring: |
CE, RoHS en WEEE |
| |
|
|
|
|
Leveringsomvang |
| |
|
|
|
| l |
AAN5 Netwerktester en Monitor |
| l |
Soft
Carrying bag |
| l |
Inductive
probe |
| l |
Remote
Identifier #1 |
| l |
Download
cable (USB-232) |
| l |
TEST PIN
Cable (30Cm) |
|
| l |
Alligator
clip (BLACK) |
| l |
Alligator
clip (RED) |
| l |
AC-DC
adapter (15V / 1A) |
| l |
BNC to F
connector |
| l |
PC Program
CD |
| l |
Gebruiksaanwijzing |
|
| |
|
|
|
 |
| |
|
|
|