The TD70 is a low cost wire map tester which
tests and certifies structured cabling
continuity to a TIA568A/B , USOC and ISDN
standards. The TD70 displays on screen wiring
configurations showing the length of all 4 pairs
and length of pair to fault up to 150m (500ft).
The TD70 will store up to 1000 test results
which can be viewed or be downloaded to a PC via
the TD70 software, test results can then be
customised with you corporate identity and
certificates produced displaying the customer's
location/job, length, cable VP and testing
standard. Maintaining all the proven features of
the TD70, identifies all common faults on wiring
schemes, installed to TIA568A/B USOC and ISDN
standards, including open circuit wires, shorted
pairs, shorts between pairs , crossed pairs ,
split pairs , pair reversals and shield /screen
continuity and it has a backlit screen. The TD70
can check installed wiring networks , alerting
the operator if any telephone services are
active on the cable test and can test for and
indicate any other active services (10mb/s,
100mb/s, token ring etc. to prevent accidental
testing of a live network. A built in tone
generator (oscillator) transmits a warble tone
into the cable enabling detection and tracing
using a standard probe. The TD70 comes complete
with one intelligent remote office identifier,
with a further 15 units available as optional
accessories , unlike far end units on competitor
products. The TD70 remotes are intelligent and
indicate if the test has passed or failed.
Specificaties
Cable Types:
UTP STP FTP SSTP
Length Measurement
0 - 150m or 500ft
Faults Indicated:
Short Circuit Pair
Battery Life Indication
(Gas Gauge) Bar Graph
Power
supply
4x1.5 AA alkaline
Battery
Open
Circuit Wire
Main Unit Display
128x64 graphical LCD
Short Between Pairs
Remote Unit Display
Green/Red LED
Split / Cross Pairs
Power Supply
6V 4 x AA cells
Pair Reversals
Battery Life
Standby 4000hrs
Continuous testing> 7.5 hrs
Fault
Display:
All Fault
and setting info displayed graphically and textually
Battery Life
Standby 4000hrs
Continuous testing> 7.5 hrs
Shield Continuity
Operating Temp.
0 to 40°C
Fault Location:
Near or Remote End
or distance if midway
Storage Temp.
-20 to 70°C
Wiring Schemes
TIA568A/B, USOC & ISDN
Weight
350gms (12oz)
Service Indication:
Telephone, 10BaseT, 100Mbit+
Dimensions
165 x 90 x 37mm
Token Ring
Safety
IEC61010-1
Voltage
Warning:
Warns off
TNV (Telecom Network Voltage )
CE:
Compliant
with Current EU Directives
Burst:
EN61000-4-4
Tone Generator:
Oscillating
810 / 1110Hz
EMC:
EN50081 / 50082
Conducted RF:
EN61000-4-6
Languages:
English (UK
USA) German, French Spanish, Portuguese, italian
