Opties           MB40 Capaciteit & UTP en STP bedradingstester                   r Hub blink mode sends link pulses to network switch to blink port LED. r Measures cable length using patented cable capacitance method. r Displays single-ended test results in wiremap format for opens, shorts, and split pairs. r Tests and displays in wiremap format shorts, opens, miswires, reversals, and split pairs with remotes. r Two-line, 16-character, back-lit, full alphanumeric LCD with icon flags. r Auto-off and timed backlight in any mode for low power consumption and long battery life. r Application: - Installation, troubleshooting, and maintenance on telco, network, or coax cable. - Identify switch port LED where network cable is terminated. - Measure cable length. - Determine wiring condition. - Identify up to 20 telco, network, or coax cable runs at a time. - Find and fix position of exposed or hidden cable.         The MB40 provides telecom, datacom, and cable installers and technicians with cable test, length measurement, and hub blink functions in one unit. The easy-to-use MB40 requires one-button operation to initiate telco, network, and coax modes for diagnostic tests and results. The main unit includes built-in RJ12 and RJ45 jacks for testing six-wire and eight-wire twisted pair and F-connector for testing coax. An integrated remote bay houses a detachable test remote with built-in jacks for testing twisted pair cable terminated with RJ12 or RJ45 connectors. The MB40 performs detailed analysis to detect miswire, no connection, short, high-resistance fault, and split pair conditions when used with remote identifiers. It also tests and reports on shorts, opens, and split pairs conducted without a remote. The MAP ID function identifies multiple cables by displaying ID numbers of map-only remotes. The MB40 measures cable length and displays PASS icon for correctly wired T568A/B and six-pin cable. Tone generator mode sends any of four user-selectable tones on all pin and pair combinations.         Specificaties         Cable types: Shielded or unshielded, CAT6, CAT5E, CAT5, CAT4, CAT3, and Coax Minimum cable length for testing for split pairs: 0.91 m Minimum cable length for PRETEST: 1.22 m Length measurement range: (CAT5/6): 0 to 610 meters (0 to 2000 feet)   Coax cable: 100Ω maximum DC resistance, center conductor plus shield Battery life: Battery life (based on a typical 9 V Alkaline battery) is for the full capacity of the battery used continuously in one of the following modes (batteries not included)   Standby: 2.5 yrs   Cable testing: 80 hrs (with backlight off) Operating temperature: 0 to 50°C Storage temperature: - 10 to 60°C Humidity: 10% to 90%, non-condensing Size - (Excluding F-connector): 3.3 x 6.7 x 15.7 cm        - (Including F-connector): 3.3 x 6.7 x 16.8 cm Weight: 235.3 g. with battery and remote Goedkeuring: CE, RoHS en WEEE         Leveringsomvang         l MB40 Capaciteit & UTP en STP bedradingstester l IC05 Werkplekadapters l KA04 2 krokodilbek naar 1 RJ45 l KA45 Aansluitkabel RJ45-RJ45 shielded (2 stuks) l ABQ2 Tas MB40 l Gebruiksaanwijzing Opties