|
Opties |
|
FAQ |
|
|
DT70 Digitale multimeter tang |
| |
|
|
|
 |
| |
|
|
|
|
r |
Measure motor in-rush current andrun current |
|
r |
Measure temperature differential with relative
mode |
|
r |
Non-contact voltage feature can be used to
immediately see if power is being supplied to
the 24VAC control circuit of thermostats |
|
r |
Frequency, Min/Max/Record, Data |
|
r |
Hold, and Peak Hold |
|
r |
Up to 40,000 Microfarads to test run and start
capacitors 4,000 count display with 41 segment
analog bargraph |
|
r |
ALL THESE PLUS... |
|
- |
Auto & Manual Ranging
|
|
- |
Low Battery Indicator
|
|
- |
Over Range Indication (“OL”)
|
|
- |
Hi Voltage Indicator(>30V AC/DC)
|
|
- |
Separate Battery/Fuse Compartment
|
|
- |
Low Ohm Range (400V)
|
|
- |
Amps AC Resolution: 0.01A
|
|
- |
VDC/VAC Resolution: 0.1mV
|
|
- |
DCμA measurement(0.01μA resolution)
|
|
- |
Temperature measurement with 0.1 ° resolution
| |
|
The DT70 with slim jaw and body is ideal for use
in cramped work areas and crowded electrical
panels. Capture in-rush current using peak hold
mode. The DT70 applications are: Measure flame
safety control current, Test start and run
capacitors & motors, Measure motor run current
and capture peak motor start up and amperage,
Measure heat anticipator current, Determine
thermocouple voltage, Test line and control
voltage, Measure air temperature in ducts, Test
for the presense of voltage in circuits without
contacting the circuit, Measure temperature
differential using relative mode. |
|
| |
|
|
|
|
Specificaties |
|
|
|
|
| |
|
|
|
|
DC Voltage: |
Max Range:
600V
Max Resolution: 0.1mV
Basic Accuracy: 0.5% |
|
Jaws: |
AC
Amps and AC Voltage higher then 24 Volt |
|
AC Voltage: |
Max Range:
600V
Max Resolution: 0.1mV
Basic Accuracy: 1.2% |
|
DC Amps: |
N/A |
|
DC Microamps: |
Max Range:
400uA
Max Resolution: 0.01uA
Basic Accuracy: 3% |
|
Jaws: |
AC
Amps and AC Voltage higher then 24 Volt |
|
AC Amps: |
Max Range:
400A
Max Resolution: 0.1A
Basic Accuracy: 3% |
|
Resistance: |
Max Range:
40MΩ
Max Resolution: 0.1Ω
Basic Accuracy: 1% |
|
Frequency: |
Max Range:
400MHz
Max Resolution: 0.1Hz
Basic Accuracy: 1% |
|
Capacitance: |
Max Range:
40mF
Max Resolution: 0.001nF
Basic Accuracy: 1% |
|
Temperature: |
Max Range:
1000°F
Max Resolution: 0.1°F
Basic Accuracy: 1% |
|
Non-Contact Voltage (NCV): |
24VAC and
above |
|
Continuity Buzzer: |
<35Ω |
|
Diode Test: |
1.5mA Max |
|
True RMS Response: |
No |
|
Peak Hold: |
Yes |
|
Relative Mode: |
Yes |
|
Min/Max Record: |
Yes |
|
Data Hold: |
Yes |
|
% Total Harmonic Distortion: |
No |
|
Range Selection: |
Auto /
Manual |
|
Display Type: |
4000 count
LCD with analog bargraph |
|
Operating Temperature: |
32°F to
113°F |
|
Relative Humidity: |
80%
non-condensing |
|
Storage Temperature: |
-4°F to
140°F |
|
Battery Type: |
9V
(MN1604) |
|
Battery Life: |
80hrs
typical |
|
Auto Off / Sleep Mode: |
Yes |
|
Dimensions (H x L x W): |
1.3” x 10”
x 2.5” |
|
Weight: |
0.8lb |
| Goedkeuring: |
CE, RoHS en WEEE |
| |
|
|
|
|
Leveringsomvang |
| |
|
|
|
| l |
DT70 Digitale multimeter tang |
| l |
KH11 K-koppel hittebestendig snoer -40/510 |
| l |
ET07 Draagtas |
|
| l |
BF62 Silicone lead set met
Krokodilbek |
| l |
Gebruiksaanwijzing |
|
|
Opties |
|
FAQ |
|
 |
| |
|
|
|